LFT, long fiber reinforced thermoplastic material, English is Long Fiber reinforced Thermoplastics, is compared with ordinary fiber reinforced thermoplastic material, usually, the fiber length of fiber reinforced thermoplastic material is less than 1 mm, while LFT, The length of the fiber is general......

The smc mold needs to be heated, not cooled. The temperature of the mold is usually between 140 and 160. In mold design, maintaining mold temperature is very important. The mold is easier to fill, the product is not easily deformed, and the surface is better. Commonly used heating systems are steam,......

In order to easily demold the product, ensure product accuracy, strength and ease of mold processing, the selection of parting surfaces should consider the following principles

The machining accuracy of the new mold mainly has three aspects: dimensional tolerance, geometric tolerance and surface roughness. The processing accuracy requirements we usually put forward for mold manufacturers are mainly dimensional tolerances and surface roughness. Dimensional tolerances are ro......